Bộ định thời gian OMRON H5F

Giá bán :
Liên hệ
Số lượng :
Tình trạng :
Còn hàng
LIÊN HỆ
Chia sẻ:
  • Mã SP
    4134
  • Thương hiệu
  • Xuất xứ
    JAPAN
  • Bảo hành
    12 THÁNG

Điều khiển thời gian hàng ngày với thao tác đơn giản.

BẠN CẦN HỖ TRỢ?

Chat với chúng tôi:

skypengananhphat  zalongananhphat

Tư vấn - Hỗ trợ : (7h45 - 17h)

(+84) 2513 857 563

Email: Sales@ngananhphat.com

Bộ định thời gian OMRON H5F

Công ty TNHH Ngân Anh Phát chuyên cung cấp dòng sản phẩm Bộ định thời gian OMRON H5F chính hãng xuất xứ Japan tại thị trường Việt Nam.


Đặc điểm nổi bật của Bộ định thời gian OMRON H5F:

• Chỉ định các ngày hoạt động.
(Tuy nhiên, bạn chỉ có thể cài đặt một mẫu các ngày hoạt động và các ngày đã chỉ định.)

• Tối đa 12 lần hoạt động ON/OFF (24 lần cho hoạt động đầu ra xung).

• Các ngày lễ đặc biệt có thể được xử lý dễ dàng với chức năng cài đặt kỳ nghỉ.

• Các điều chỉnh cho sự thay đổi lịch trình đột ngột có thể được thực hiện dễ dàng bằng cách sử dụng chức năng ghi đè đầu ra và hoạt động tự động quay lại.

• Chương trình hoạt động có thể được kiểm tra dễ dàng với chức năng kiểm tra chương trình.

• Hỗ trợ hoạt động đầu ra xung và cài đặt giờ mùa hè.

• Tích hợp các đầu nối an toàn cho ngón tay.

• Tuân thủ các chứng nhận UL, CSA và CE.

• Đáp ứng nhiều yêu cầu lắp đặt: lắp âm, lắp nổi và lắp trên thanh DIN.

Thông số kỹ thuật

Ratings

Rated supply voltage 100 to 240 VAC (50/60 Hz)
Operating voltage range 85% to 110% of rated supply voltage
Power consumption Approx. 2.4 VA at 264 VAC
Control outputs Contact output: SPST-NO, 15 A at 250 VAC, resistive load, 10 A at 24 VDC, resistive load
Minimum applied load: 100 mA at 5 VDC (failure level: P, reference value)
NEMA A300 Pilot Duty, 1/3 HP at 120 VAC
External connections Screw terminals (M3.5 screw)
Terminal screw
tightening torque
0.98 to 1.17 Nm

 

Characteristics

Accuracy of
operating time
±0.01% ±0.05 s max. *1
Setting error
Influence of voltage
Influence of
temperature
Influence of EMS.
(at EN61326-1)
Time accuracy ±15 s per month (at 25°C)
Memory protection Continuous use: 5 years min. (at 25°C); Power-interruption rate of 50%: 10 years min. (at
25°C) *2 (lithium battery)
Insulation resistance 100 MΩ min. (between current-carrying terminals and exposed non-current-carrying metal
parts, between operating power supply circuit and control output circuit and between non-
continuous contacts)
Dielectric strength 2,000 VAC, 50/60 Hz for 1 min (between current-carrying terminals and exposed non-
current-carrying metal parts and between operating power supply circuit and control output
circuit)
1,000 VAC, 50/60 Hz for 1 min (between non-continuous contacts)
Noise immunity 1.5 kV (between power terminals)
Square-wave noise by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise)
Vibration resistance Destruction:10 to 55 Hz with 0.375-mm single amplitude, four cycles each in three directions
(8 minutes per cycle)
Malfunction:10 to 55 Hz with 0.25-mm single amplitude for 10 minutes each in three directions
Shock resistance Destruction:300 m/s2 3 times each in 6 directions
Malfunction:100 m/s2 3 times each in 6 directions
Ambient temperature Operating: -10°C to 55°C (with no icing)
Storage: -25°C to 65°C (with no icing)
Ambient humidity Operating: 35% to 85%
Life expectancy Mechanical (at 20°C):
100,000 operations min.
Electrical (at 20°C):
50,000 operations min. (15 A, 250 VAC, resistive load)
50,000 operations min. (1 HP, 250 VAC, motor load)
50,000 operations min. (10 A, 250 VAC, inductive load (cosφ = 0.7))
50,000 operations min. (100 W, 100 VAC, lamp load)
10,000 operations min. (300 W, 100 VAC, lamp load)
Approved safety
standards
UL508/Listing, CSA C22.2 No. 14, conforms to EN61010-1 (Pollution degree 2/overvoltage
category II)
Conforms to VDE0106/P100 (finger protection).
Conforms to Electrical Appliance and Material Safety Law (for Japan)
EMC (EMI) EN61326-1 *3
Emission Enclosure: EN55011 Group 1 class A
Emission AC mains: EN55011 Group 1 class A
(EMS) EN61326-1 *3
Immunity ESD: EN61000-4-2: 4 kV contact discharge (level 2); 8 kV air discharge (level 3)
Immunity RF-interference: EN61000-4-3: 10 V/m (Amplitude-modulated, 80 MHz to 1 GHz,
1.4 to 2 GHz) (level 3)
Immunity Conducted
Disturbance: EN61000-4-6: 10 V (0.15 to 80 MHz) (according to EN61000-6-2)
Immunity Burst: EN61000-4-4: 2 kV power-line (level 3); 1 kV I/O signal-line (level 4)
Immunity Surge: EN61000-4-5: 1 kV line to lines (power and output lines) (level 2); 2 kV line to
ground (power and output lines) (level 3)
Immunity Voltage Dip/Interruption: EN61000-4-11: 0.5 cycle, 100% (rated voltage)
Immunity Magnetic Power Field: EN61000-4-8: 30 A/m
Case color Light gray (Munsell 5Y7/1)
Weight H5F-B: approx. 115 g; H5F-KB: approx. 160 g; H5F-FB: approx. 130 g

*1. The total error including the repeat accuracy, setting error, variation due to voltage change, and variation due to
       temperature change is ±0.01%±0.05 s max. ±0.01% also indicates an error in the time interval of a set time.
*2. The total time when power is not being supplied.
*3. Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)