CẢM BIẾN BÁO CHÁY NGOÀI TRỜI TAKEX

Giá bán :
Liên hệ
Số lượng :
Tình trạng :
Còn hàng
LIÊN HỆ
Chia sẻ:
  • Mã SP
    2266
  • Thương hiệu
  • Bảo hành
    12 Tháng
BẠN CẦN HỖ TRỢ?

Chat với chúng tôi:

skypengananhphat  zalongananhphat

Tư vấn - Hỗ trợ : (7h45 - 17h)

(+84) 2513 857 563

Email: Sales@ngananhphat.com

CẢM BIẾN BÁO CHÁY NGOÀI TRỜI TAKEX

FLAME SENSOR OUT DOOR

Chi tiết kỹ thuật các dòng sản phẩm chính hãng cảm biến báo cháy ngoài trời FS-5000E từ nhà sản xuất Takex xuất xứ Japan được công ty Ngân Anh Phát chúng tôi phân phối và cung cấp tại thị trường Việt Nam

Các tính năng chính cảu dòng FS-5000E

+ Cảm biến báo chay bằng tia cực tím với độ nhạy cao
+ Giá đỡ xoay đa hướng
+ Đầu ra relay NO/NC
+ Điều chỉnh thời gian phản hồi
+ Dùng được trong nhà lẫn ngoài trời

Model:

FS-5000E

Thông số cảm biến báo cháy dùng ngoài trời FS-5000E:

Model FS-5000E
Detection system Ultraviolet rays detection
(detected wave length 180~260nm)
Detection area Distance: 10m (33ft) max. (7cm flame)
Angle
· Horizontal: approx. 100 degrees (60 degrees downward)
· Vertical: approx. 75 degrees (15 degrees upward)
Adjustment range 
· Horizontal 25 degrees by base unit
· Vertical 30 degrees (4 steps) by sensor head
Sensitivity adjustment Sensitivity: H (100%), L (50%) (selectable)
Detection timer: 1sec, 6sec, 15sec, 30sec (selectable)
Power supply 10V to 30VDC
Power consumption 35mA or less
Alarm output Dry contact relay Form C (NO/NC)
Contact capacity: 30V (AC/DC) 0.5A, (resistance load)
Operation time: the following are selectable
· Detection time + off delay operation approx. 2sec to 1min
· Detection time + off delay operation approx. 5sec to 10min
Output operation: the following are selectable
· Same time as above continuous output
· Same time as above flashing output
Operation mode (day/night function):
· 5 lux night time operation
· ∞ lux day time operation (adjustment volume)
Alarm memory Memory LED blinks for 3min., then lights for 47min. (auto-reset)
LED Operation LED (red): synchronous dry contact relay
Memory LED (yellow): blinks for 3min and then lights
Wiring Reed wiring
Power supply: 2 / dry contact: 3
Ambient temperature -20°C to +50°C (-4°F to +122°F)
Installation Indoor/outdoor
Weight Approx. 550g (19.3oz)
Appearance Sensor part: PC resin (white)
Bracket: AES resin (white)
Supplied accessories · Tapping screw ∅6 x 30: 4pcs
· Tapping screw ∅4 x 8: 1pc
· Band: 1pc
· Area mask seal: 1pc