- AUTOMATION
- MACHINE DEVICE
- CONSTRUCT DEVICE
- FACTORY DEVICE
- TESTING DEVICE
- TENSION MEASUREMENT
- TRACTION MEASUREMENT
- TORQUE MEASUREMENT
- RPM MEASUREMENT
- THICKNESS MEASUREMENT
- STIFFNESS MEASUREMENT
- DISTANCE MEASUREMENT
- VISCOSITY MEASUREMENT
- FLOW/LEVEL MEASUREMENT
- DEPTH MEASUREMENT
- DIAL INDICATOR
- MICROMETER
- CALIPER
- MEASUREMENT ACCESSORIES
- MICROSCOPE
- MAGNIFIER
- TENSION TESTOR
- LINEAR SCALE
- TEMPERATURE MEASUREMENT
- WIND MEASUREMENT
- SOUND MEASUREMENT
- SPEED MEASUREMENT
- DENSITY MEASUREMENT
- CURRENT MEASUREMENT
- WEIGHT MEASUREMENT
- CALIPERS
- ENVICONMENT DEVICE
- SOLAR PRODUCTS
-
AUTOMATION
CategoryBrand
-
MACHINE DEVICE
-
CONSTRUCT DEVICE
-
FACTORY DEVICE
-
TESTING DEVICE
Category- TENSION MEASUREMENT
- TRACTION MEASUREMENT
- TORQUE MEASUREMENT
- RPM MEASUREMENT
- THICKNESS MEASUREMENT
- STIFFNESS MEASUREMENT
- DISTANCE MEASUREMENT
- VISCOSITY MEASUREMENT
- FLOW/LEVEL MEASUREMENT
- DEPTH MEASUREMENT
- DIAL INDICATOR
- MICROMETER
- CALIPER
- MEASUREMENT ACCESSORIES
- MICROSCOPE
- MAGNIFIER
- LINEAR SCALE
- TEMPERATURE MEASUREMENT
- WIND MEASUREMENT
- SOUND MEASUREMENT
- SPEED MEASUREMENT
- DENSITY MEASUREMENT
- CURRENT MEASUREMENT
- WEIGHT MEASUREMENT
Brand
-
ENVICONMENT DEVICE
Brand
- Home Page
- Product
- AUTOMATION
- TIMERS
- Solid-state Timer OMRON H3FA
Solid-state Timer OMRON H3FA
-
Product No4132
-
Brand
-
OriginJAPAN
-
Guarantee12 MONTHS
DIP Model Timer for PC Board Use Provides Contact and Solid-state Output
Solid-state Timer OMRON H3FA
Ngan Anh Phat Co., Ltd specializes in providing genuine products Solid-state Timer OMRON H3FA from the manufacturer Omron, originating from Japan, to the Vietnamese market.
Outstanding features of the Solid-state Timer OMRON H3FA:
• Four time ranges are selectable.
Models suffixed -[]A[]: 1 s, 10 s, 1 min, 10 min.
Models suffixed -[]B[]: 6 s, 60 s, 6 min, 60 min.
• Timer can be cleaned while mounted on a PC Board with the sealing tape affixed.
• Twenty-four-pin IC socket can be used for mounting the Timer.
• Mountable on a 1-inch pitch rack.
(H 19.5 × W 36.9 × D 17.75 mm)
Specifications
Time Ranges
| Model | Rated time | Time setting range |
|---|---|---|
| H3FA-A | 1 s | 0.1 to 1 s |
| H3FA-AU | 10 s | 1 to 10 s |
| H3FA-SA | 1 min | 0.1 to 1 min |
| H3FA-SAU | 10 min | 1 to 10 min |
| H3FA-B | 6 s | 0.6 to 6 s |
| H3FA-BU | 60 s | 6 to 60 s |
| H3FA-SB | 6 min | 0.6 to 6 min |
| H3FA-SBU | 60 min | 6 to 60 min |
Note: 1. The above timing ranges apply when the internal variable resistor of H3FA is used.
2. The external variable resistor may also be used by opening the terminal connected to the internal variable
resistor.
3. Wire the appropriate terminal to select a time setting range. Refer to Rated Time and Terminal Connections on
Data Sheet for details.
Ratings
| Item | H3FA-A/ H3FA-B H3FA-AU/ H3FA-BU |
H3FA-SA/ H3FA-SB H3FA-SAU/ H3FA-SBU |
|---|---|---|
| Rated supply voltage | 5 V DC, 6V DC, 12V DC, 24 V DC *1 | 5/6 V DC *1 12/24 V DC *1, *2 |
| Operating voltage range | 5 V DC: 90% to 110% of rated supply voltage 6, 12, 24 V DC: 85% to 110% of rated supply voltage |
|
| Power consumption | 5, 6 V DC: approx. 230 mW 12 V DC: approx. 270 mW 24 V DC: approx. 330 mW |
5/6 V DC: approx. 80 mW 12 V DC: approx. 100 mW 24 V DC: approx. 240 mW |
| Control outputs | Contact output: SPST-NO + SPST-NC, 3 A at 250 V AC with resistive load, Minimum applied load: 10 mA at 5 V DC (Failure level: P, reference value) |
Solid-state output: 150 mA max. at 30 V DC Residual voltage: 1.0 V max. |
| Ambient temperature | Operating: -10°C to 55°C (with no icing) Storage: -25°C to 65°C (with no icing) |
|
| Ambient humidity | 35% to 85% | |
Characteristics
| Accuracy of operating time |
±0.5% FS max. *1, *3 |
|---|---|
| Setting error | 0 to 30 % FS max. (at 20°C , at rated voltage) |
| Reset time | 10 ms max. |
| Influence of voltage | ±1% FS max. (2% FS max. for 5, 6, 5/6 V DC-operated models) |
| Influence of temperature | ±5% FS max. *1 |
| Insulation resistance | 100 MΩ min. (at 500 V DC) |
| Dielectric strength | 1,500 V AC, 50/60 Hz for 1 min (between control output and operating circuit) *2 1,000 V AC, 50/60 Hz for 1 min (between contacts not located next to each other) *2 |
| Vibration resistance | Destruction: 10 to 55 Hz with 0.375-mm single amplitude in 3 directions for 2 hour each Malfunction: 10 to 55 Hz with 0.25-mm single amplitude in 3 directions for 10 minutes each |
| Shock resistance | Destruction: 1,000 m/s2 3 times each in 6 directions on 3 axes Malfunction: 100 m/s2 3 times each in 6 directions on 3 axes |
| Life expectancy | Mechanical: 10,000,000 operations min. (under no load at 1,800 operations/h) *2 Electrical: 100,000 operations min. (3 A at 250 V AC, resistive load at 1,800 operations/h) *2 |
| Approved safety standards |
UL508, CSA C22.2 No.14 |
| Weight | Contact output models: approx. 15 g Solid-state output models: approx. 10 g |
*1. Add or subtract 10 ms to the ratings when using a timer with a rated time of 1 s.
*2. Applicable to contact output models.
*3. This value assumes that the adjustment on the H3FA is used. (It does not apply if an externally connected resistor is
used. For details, refer to External Resistors and Operating Time (Reference Value) on Data Sheet for details.)
- D3, Dong Khoi, Group 23, Quarter 35, Tam Hiep Ward, Dong Nai Province, Vietnam
- (+84) 2513 857 563
- info@ngananhphat.com, sales@ngananhphat.com
- www.ngananhphat.com
Giấy phép đăng ký kinh doanh số : 3600955737 do Sở Kế Hoạch & Đầu Tư Tỉnh Đồng Nai cấp ngày 19/11/2007.